Tajfun started developing and manufacturing logging winches in 1979. We constantly update, upgrade and develop different winch types for different needs. The results of our long term development are:

  • Simple and fast set up and take down,
  • Reliable and easy hydraulic (Type AHK and VIP PRO) or mechanical control (Type A),
  • Very simple and fast installation to tractor's three point mounting system,
  • Robotic welded stable and robust construction, made of high quality steel, laser cut and powder
  • Sturdy drive line, each shaft with double bearings and double reduction gearing
    (winches from 10,000 Ibs to 22,500 Ibs),
  • Highly efficient clutch activation, even with mechanical winches – short pull, low activation pressure,
  • High efficiency and safety.

  • The motor saw holder can be installed on the left or right side of the safety net.

  • Adjustable upper hitch.

  • PTO shaft holder.

  • Lower coupling bolts are distinguished by a patented safety system.

  • Hitch holder and two covered toolboxes.

  • Large and massive drum (high rope capacity) with high diameter drum core (low loss of pulling power, long rope lifetime).
  • Optimally dimensioned drum axle.
  • Strong drum walls.
  • Wide Brakeband.
  • Quality SKF bearing.
  • High pulling power and lower load of components due to 3 or 5-plate clutch.
  • Thick strengthened drive chain.

TAJFUN Hydraulic Winches (AHK)

feature a self contained electro hydraulic system to operate the winch clutch and brake, and use a control pendant (standard equipment) or a radio remote control (optional equipment). Radio remote control allows remote control of the winch (without any further need to access the winch or tractor) or remote control of the tractor (engine revolution control, tractor engine start and stop, P.T.O. Shaft activation – these functions must be installed by an authorized service). The important benefits of remote control system are easy operation of the winch by a single person, high work efficiency and safety.

EGV 45 AHK 45 kN (4,5 t)
EGV 55 AHK 55 kN (5,5 t)
EGV 65 AHK 65 kN (6,5 t)
EGV 85 AHK 85 kN (8,5 t)
EGV 105 AHK 100 kN (10 t)
DGV 2 x 55 AHK 2 x 55 kN (2 x 5,5 t)

  • End switch

    The new wire rope guide with an end switch for stopping spooling.
    When operated via the upper winch the spooling of the wire rope is automatically stopped, when the rope loop reaches the bushing inside the wire rope guide. This prevents damages to the upper pulley.

  • TAJFUN Driven Pulley SG 

    Integrated end switch for power-off spooling;
    For ease of operation and extended lifespan of the wire rope;
    Manual pulling of the rope from the drum is replaced by a push-button operation;
    Good rope adhesion – safe operation independent of external influence;
    Assisted spooling of the wire rope out of the drum – provides steady tensioning of the wire rope on the drum during spooling the rope in or out of the drum when the wire rope is not under load;
    Minimum maintenance;
    Available for AHK hydraulic winches.

  • Speed regulation during spooling the wire rope out of the drum.